Home » Pumps

CAST IRON SLUICE VALVE (Non Rising Spindle And Rising Spindle)

RANGE: as per IS 14846 Size 32 to 1500mm (Non Rising & Rising) as per BS 5163 SIZE: 50mm to 600mm (Non Rising) Pressure Rating up to PN 1.6

Send Enquiry

Features:-
  • Rigid and sturdy design
  • Low pressure loss across the valve
  • Available in Non Rising as well as in Rising Spindle Type
  • Suitable for clear water up to 45 C and 5000 ppm turbidity, other fluids with maximum pressure / temperature conditions within the scope of IS:14846
  • Long service life and leak-tightness even after thousands of open / close cycles
  • Application :-
  • Water works
  • Water / Effluent / Sewage treatment plants
  • Fire Fighting
  • Power
  • Non Rising Spindle Gate Rising Spindle Gate Valve

    Butterfly Valve

    RANGE: Conforming to IS:13095/BSEN 593 BS: 5155/AWWA C504 Size 65mm to 3600mm - Wafer/Dual Flanged/Lugged Type ECCENTRIC type Size 50mm to 600mm - CENTRIC type|Pressure up to PN1.6 / Class 250

    Send Enquiry

    Features:-
  • Available in Centric Wafer / Lugged design
  • Single, double eccentric design
  • Bubble tight shut off
  • Less wear and tear of seal and longer life
  • Self-cleaning and non-jamming seat design
  • Low operating torque
  • Rigid and sturdy design
  • Application :-
  • Ideal for throtting as well as isoltaion Power plants
  • Water supply and sewage
  • Chemical and petrochemical plants
  • Water works
  • Water / Effluent / Sewage treatment plants
  • Centric Butterfly Valve Single Double Eccentric Butterfly Valve

    CAST IRON REFULX (Non Return) VALVE (Swing Check Type)

    RANGE: Conforming to IS: 5312 Part - 1 Size 40mm to 700mm Pressure up to PN 1.6

    Send Enquiry

    Features:-
  • Swing check type design
  • Rigid and sturdy design with minimum head loss
  • Long service life and leak-tightness of high order
  • Suitable for clear water having turibidity upto 3000 o ppm and temperature of 65 Centigrade (rubber to o bronze / stainless steel seating) and upto 95 Centigrade (Bronze/ bronze, stainless steel / stainless steel seating
  • Application :-
  • Used in waterworks piplines to reduce water hammer effect
  • Preventing back flow of water to the pump
  • Non Return Valve (Single Door)

    MULTI DOOR REFLUX(Non return) VALVE(Swing check type)

    RANGE: Confirming to IS: 5312 Part - 2 Size 500 mm to 1500 mm Pressure up to PN1.6

    Send Enquiry

    Features:-
  • Non slam and quick closing characteristics
  • Seat rings are fitted with special rivets and carefully machined to close tolerances
  • Suitable for clear water having turbidity up to 5000 ppm and temperature of 45 degrees Centigrade
  • Rigid and sturdy design with minimum head loss across the valve
  • Long service life
  • Application :-
  • Used in waterworks pipelines to reduce water hammer effect
  • Non Return Valve (Multi Door)

    CHECK VALVE

    RANGE: Confirming to API: 594 Size 50 mm and 1500 mm Pressure rating up to PN16 / CL 300

    Send Enquiry

    Features:
    • Used in waterworks pipeline to reduce water hammer effect
    • Prevents back flow of water
    • Water supply / irrigation schemes
    • Power plants / chemical and petrochemical plants

    Applications:
    • Kinetic Air Valves are commonly used in air vaunting / air admission services in water pipe line
    • These are designed to operate with the floats inside
    • Turbine or clear water
    • Sewage

    Dual Plate Check Valve Single Plate Wafer Check Valve

    AIR VALVE

    RANGE: Confirming to IS: 14845 / AWWA C512 Size 50 to 250 mm - Double ORIFICE type Size 25mm and 40mm - Single air valve Ratings PN 1.0 and PN 1.6

    Send Enquiry

    Features:
    • Double orifice type (small and large orifice), kinetic type
    • Single air valve
    • Non clogging and self sealing balls for trouble free operation
    • Totally tamper proof kinetic air valve series available Suited for turbid or clear water sewage; releasing air when water mains are being filled and admitting air while being emptied
    • Cuts loss of water when water mains are full Releasing air accumulated under pressure in pipe during normal conditions

    Applications:
    • Water supply lines / Distribution lines
    • Clear water and sewage applications

    AIR VALVE AS PER AWWA C 512 Conventional Kinetic Air Valve Single Float Air Valve TAMPER PROOF KINETIC AIR VALVE

    FOOT VALVE (Swing Type)

    RANGE: Confirming to IS: 4038 Size 50 mm to 450 mm - Cast Iron Size 500 mm and 600 mm - Fabricated Pressure Rating PN 0.2

    Send Enquiry

    Features:
    • Rigid and sturdy design with minimum loss of head across the valve
    • Perfectly flat seating surfaces for good sealing
    • Preventing entry of foreign body to pump through suction pipe
    • Long service life

    Applications:
    • Used in suction side of pump to avoid flow reversal from pump to sump with monobloc pumps

    Foot Valve

    CAST STEEL GATE VALVE

    RANGE: Conforming to API 600 Class 150# sizes 2"(50mm) to 30"(750mm) Class 300# sizes 2"(50mm) to 24" (600mm) Class 600# sizes 2" (50mm) to 14" (350 mm)

    Send Enquiry

    Features:
    • Double flanged / butt weld end, outside crew rising stem,yoke type bonnet
    • Back seating bush arrangement to enable repacking under pressure
    • Rigid and sturdy design
    • Low pressure loss across the valve
    • Long service life and leak tightness

    Applications:
    • Naptha and naptha derivatives in oil refineries
    • Water, steam, air, gas and liquids having corrosive properties
    • Suitable for wide range of working conditions of pressure and temperature ratings

    Cast Steel Gate Valve

    CAST STEEL GLOBE VALVE

    RANGE: Conforming to BS 1873 Class 150# sizes 1" (25mm) to16" (400mm) Class 300# sizes 7" (25mm) to 16" (400 mm) Class 600# sizes 2" (50mm) to 12" (300mm)

    Send Enquiry

    Features:
    • Back seating bush arrangement to enable repacking under pressure
    • Back seating bush arrangement to enable repacking under pressure
    • Rigid and sturdy design
    • Long service life

    Applications:
    • Naptha and naptha derivatives in oil refineries
    • Water, steam, air, gas and liquids having corrosive properties
    • Suitable for wide range of working conditions of pressure and temperature ratings

    Cast Steel Globe Valve

    CAST STEEL CHECK VALVE

    RANGE: Conforming to BS 1868 Class 150# sizes 1" (25mm) to 28" (700mm) Class 300# sizes 2 1/2" (65mm) to 28" (700 mm) Class 600# sizes 4" (100mm) to 18" (450mm)

    Send Enquiry

    Features:
    • Swing check type, Double flanged/butt weld end, bolted cover design
    • Rigid and sturdy design with long service life

    Applications:
    • Naptha and naptha derivatives in oil refineries
    • Water, steam, air, gas and liquids having corrosive properties
    • Suitable for wide range of working conditions of pressures and temperature ratings

    Cast Steel Check Valve

    FORGED STEEL GATE VALVE

    Conforming to API 602/BSEN 15761 (BS:5352) standards RANGE: Size 1/4" (8mm) to 2" (50mm) Pressure Class 800#

    Send Enquiry

    Features:
    • Outside screw and yoke type bolted bonnet construction
    • Rigid and sturdy design
    • Long service life with leak tightness Back seating surfaces provided integral to bonnet
    • Ends - socket weldable / screwed

    Applications:
    • Refineries and Petrochemical Industries
    • Fertilizer Plant
    • Themal Power Plant
    • Other Process Industries

    Forged Steel Gate, Globe, Check Valve

    FORGED STEEL GLOBAL VALVE

    Conforming to BSEN 15761 (BS:5352) RANGE: Size 1/4" (8mm) to 2" (50mm) Pressure Class 800#

    Send Enquiry

    Features:
    • Outside screw and yoke type bolted bonnet construction
    • Rigid and sturdy design
    • Long service life with leak tightness Back seating surfaces provided integral to bonnet
    • Ends - socket weldable / screwed

    Applications:
    • Refineries and Petrochemical Industries
    • Fertilizer Plant
    • Themal Power Plant
    • Other Process Industries

    Forged Steel Gate, Globe, Check Valve

    FORGED STEEL CHECK VALVE

    Manufactured to BSEN 15761 (BS:5352) RANGE: Sizes " (8mm) to 2" (50mm) Pressure Class 800#

    Send Enquiry

    Features:
    • Piston lift check type incorporating self cushioning effect
    • Streamlined flow passages designed to minimize pressure losses and erosion
    • Guided piston assuring accurate return to seat ring to achieve leak - tightness

    Applications:
    • Refineries and Petrochemical Industries Fertilizer Plant
    • Themal Power Plant
    • Other Process Industries

    Forged Steel Gate, Globe, Check Valve

    BALL VALVE

    Manufactured to IS:9890 / EN ISO 17292 / (BS 5351) RANGE: Sizes 15 mm to 300 mm Pressure Class 150# and 300#

    Send Enquiry

    Features:
    • Single piece / three piece design, full bore / reduced bore
    • Ends - Screwed / Socket weld / Flanged end

    Applications:
    • Refineries
    • Fertilizers & Petro Chemical
    • Thermal Power Stations
    • Process Industries

    Ball Valve

    STEAM TRAP DEVICE

    RANGE: Size 15, 20 and 25 mm Max Operating pressure upto 31.64 bar (450 Psig) Max Operating Temperature up to 450 degree centigrade (842 degree Fahrenheit)

    Send Enquiry

    Features:
    • Internationally patented design for minimum loss of live steam
    • Multi-concept, high energy saving, efficient impulse cum themodynamic steam trapping device
    • Ends - Flanged / Screwed

    Applications:
    • For every industry using steam lines

    Steam Trap Device